Please Note:
Throughout this site we make reference to Connectable Areas, Dimensions, Pipe Sizes, Flow Rates and Rainfall Intensities. These by necessity vary, world wide. If you are interested in any product with such a specification, please either contact the 3P Partner in your country for the full Specification and/or for general Export Enquiries, please contact us for an immediate response. Thank you for your assistance.

Products In-Tank Integral Filters > Attenuation and Infiltration Filter Article No. 1000630

Description

This specialised filter retains all debris in a stainless steel basket (mesh size 0,55 mm) such that no dirt is washed away into the soakaway or infiltration structure. The filter basket made of stainless steel is easily removed with removal handle.

This filter is very suitable for equipments where the water is used in washing machines, toilet flushing and garden watering, and for sites in which the rainwater has to be drained off. That means where no connection with a sewer is possible. Can be used in conjunction with the 3P Flow Regulator I or II, or other devices. Locking lid available.

All inlets and outlets at DN 110, one inlet can also be used as an emergency overflow. The cleaned rainwater is led through the lower connection into the rainwater tank. Also a calmed inlet can be installed there.

Connection capacity for roof areas up to 200 mē. All connections DN 110.

The cleaned water can be used in washing machines, toilet flushing and garden watering, in homes, in commerce, in public buildings and in industry.

The filter has to be cleaned depending on the contamination several times during the year

How it works

  1. Rainwater is led onto the filter cartridge.
  2. The dirt is detained in the dirt collecting basket. The basket has to be cleaned if necessary.
  3. One inlet DN 110 can also be used as an emergency overflow.
  4. Cleaned water flows over the inlet DN 110 into the rainwater tank.
  5. Use of a calmed inlet is possible.

Technical Data

Rainwater filter according to DIN 1989-2, Typ B

Connection inlet: DN 110
Outlet into rainwater tank: DN 110
Emergency overflow or additional inlet: DN 110

Housing material: Polyethylen

Material filter basket: Stainless steel 1.4301

Mesh size: 0,55 mm

Weight: 2,8 kg

 

Example

Installation directly in a rainwater tank made of plastic with flow regulator.

Example

Installation in a soakaway.

Example

Installation above an infiltration element.

Accessories

3P Telescopic Extension for 3P Attenuation and Infiltration Filter
Art.-Nr. 1000560

Accessories

Locking lid for 3P Attenuation and Infiltration Filter
Art.-Nr. 1000510