Technical Data
Signal part:
Dimensions B x H x T: 97 x 163 x 62 mm
Weight: 0,5 kg
Supply Voltage: AC 230 V 50 Hz
Input: max. 5 VA
Mains fuse: M 32 mA
Shockproof Socket:
AC 230 V, max. 10 A, cos >= 0,9
Protection: T 10 A
Temperature of the area of application:
Surroundings:
0°C until+ 40°C
Protection class: II (DIN 57 700)
Protection category: IP 20 (EN 60529#9)
Radio shielding: according to EN 50082-1
Stability: according to EN 50082-1
Filling Level Probe
Supply Voltage: AC 6 V
Filling Level Probe:
Supply Voltage: AC 6 V
Electricity of sensor: 1,2 mA
Dimensions (L x Ø): 87 x 30 mm
Fastening: through G1-connection
Weight: 0,2 kg
Functional princ.: Conductivity measurement
Medium: Potable water and rainwater
Hopper for feeding:
Feeding into rainwater tank according to DIN
consisting of:
Hopper for feeding DN50 with emergency overflow DN40 made of Polyethylen with connector for wall fastening.
Magnetic Valve:
Required space (B x H x T): 95 x 80 x100 mm
Weight: 0,5 kg
Supply Voltage: AC 230 V 50 Hz
Input: max. 5,5 VA
Connection circuit: 3 m
Installation position: optional
Medium: Potable water and rainwater
Rated pressure: 12 bar
Flow using 4 bar primary pressure and free outlet: aprox. 50 l/min
Function closed currentless
Connection:
Inlet: G 3/4"-Cap nut with filter mesh/seal
Outlet: G1/2"-Inside thread
Protection class: I (DIN 57 700)
Protection category: IP 65 (EN)
To prevent deposits on the magnetic valve in times of sufficient rainfall, the valve is opened 3 times a week for just one second and closed again.
Signal part and sensor are connected pluggable through a circuit of 15 m.
The magnetic valve is connected firm to the signal part through a three-conductor power line (length of 3 m).
Connection to circuit of potable water:
1/2" hose with netting of stainless steel and blocking valve for the connection of the magnetic valve to the circuit of potable water.
|
