Please Note:
Throughout this site we make reference to Connectable Areas, Dimensions, Pipe Sizes, Flow Rates and Rainfall Intensities. These by necessity vary, world wide. If you are interested in any product with such a specification, please either contact the 3P Partner in your country for the full Specification and/or for general Export Enquiries, please contact us for an immediate response. Thank you for your assistance.
> Products > Downpipe Filters > Filter Collector Article No. 2000810

Description

The 3P Filter Collector filters and collects rainwater for water butts and rain tanks. It is made of high quality durable plastic.

The Filter Collector leads clean water to the storage tank with high efficiency under normal rainfall (85 to 95%). The filter can act as the overflow outlet for the tank once filled.

With 2 positions open or closed.

Integrated filter sieve. The mesh is made of stainless steel (mesh size 0,7 x 1,7 mm).

For roof areas up to 70 m².

For installation in downpipes at 68 mm and 110 mm, adapters included.

Easy installation and maintenance.

Complete with adapter and reduction sets.

How it works

  1. Rainwater is channelled from the filter entrance to the sieve cartridge.
  2. Dirt is rinsed to the sides, and to waste.
  3. Cleaned water is led through the cartridge outlet channel to storage.
  4. Settings for winter and summer conditions. Twist 180° to remove cartridge filter, no need to demount filter body. The filter cartridge can be cleaned easily with detergent and a brush.

Technical Data

  1. Reduction at Ø 68 - 100 mm.
  2. Connector for downpipes Ø 110 mm.
  3. Outlet connection at Ø 75 mm.
  4. Adapter for connection Ø 50 mm/32 mm.
  5. Guiding plates.
  6. Stainless Steel filter mesh.
  7. Settings for open/closed conditions.

Technical Data

Assembly in standpipes or downpipes at Ø68 - 110 mm.

Housing material: Polyethylen
Material filter sieve: stainless steel 1.403

Mesh size 0,7 x 1,7 mm

Weight: 0,86 kg

Example

3P Filter Collector brown with adapter, here connected directly with the 3P Rainwater Tank with a capacity of 300 l.

Example

3P Filter Collector grey without adapter, here connected directly with the 3P Rainwater Tank with a capacity of 500 l.

Example

3P Filter Collector grey connected with a Feature Water Tank.

Accessories

3P Connection Set Art.-Nr. 9000123
Hose Ø 32 mm with tank wall seal connector and hand drill. Length of hose: 250 mm.

Accessories

3P Circular Saw DN 50 Art.-Nr. 9000276
For connection of the 3P Filter Collector with outlet DN 50 to the butt. Connection has to be made over HT-pipe DN 50, seal DN 50 is included.