Description

A total retention rainwater filter with integrated dirt collecting basket at mesh width of 1 mm. The filter basket is easily removed with a removal handle.

Installaton in a rainwater tank or turret, or before a tank in the ground using the 3P Telescopic Extension Set with lid. This filter is very suitable for equipments of watering the garden and for sites in which the rainwater has to be drained away. That means where no connection with a sewer is possible.

All inlets and outlets at DN 110, one inlet can also be used as an emergency overflow. The cleaned rainwater is led through the lower connection into the rainwater tank. Also a calmed inlet can be installed there.

Connection capacity for roof areas up to 200 m².

The cleaned water can be used for garden watering.

The filter has to be cleaned depending on the contamination several times during the year.

How it works

1. Rainwater is led onto the filter cartridge.
2. The dirt is detained in the dirt collecting basket. The basket has to be cleaned if necessary.
3. One inlet DN 110 can also be used as an emergency overflow.
4. Cleaned water flows over the inlet DN 110 into the rainwater tank.
5. Use of a calmed inlet is possible.

Technical Data

Filter according to DIN 1989-2, Typ B
Connection inlet: DN 110
Outlet into rainwater tank: DN 110
Emergency overflow or additional inlet: DN 110

Connection capacity for roof areas up to 200 m².

Housing material: Polyethylen

Material filter basket: Polyethylen Ø 305 x 288 x 245 mm

Mesh size: 1mm

Weight: 2,2 kg

Example

Installation directly in a rainwater tank made of plastic.

Example

Installation directly in a rainwater tank made of concrete.

Accessories

3P Telescopic Extension for 3P Garden Filter
Art.-Nr. 1000560

Accessories

Locking lid for 3P Garden Filter
Art.-Nr. 1000510