Please Note:
Throughout this site we make reference to Connectable Areas, Dimensions, Pipe Sizes, Flow Rates and Rainfall Intensities. These by necessity vary, world wide. If you are interested in any product with such a specification, please either contact the 3P Partner in your country for the full Specification and/or for general Export Enquiries, please contact us for an immediate response. Thank you for your assistance.
> Products > Downpipe Filters > Rain Collector Article No. 2000300

Description

The simple 3P Rainwater Collector with large slat filter collects and filters the rainwater from small roofs for smaller rainwater tanks. Fits downpipes made of copper, aluminium or galvanised at DN 100, with a 3/4" outlet connection, screw thread or push-fit.

Use in sommer and winter possible.

Complete with reduction DN 100.


How it works

  1. Leaves are collected on the slat filter.
  2. By opening the upper part, dirt can be removed easily.
  3. Cleaned rainwater is derivated over the connection to the rainwater tank.

    4. The inner filter insert can be turned:

  4. Summer function:
    Water is led into the rainwater tank.
  5. Winter function:
    Water is led into the sewer.

Technical Data

Available in grey and brown.

Connection Ø 100 mm for plate downpipes.

Connection with rainwater tank through 3/4" AG or the hose can be fitted directly.

Material: Polyethylen

Weight: 0,34 kg

Example

Installation of the 3P Rain Collector grey in a zinc downpipe.

Example

Installation of the 3P Rain Collector brown in a copper downpipe.

Example

Connection to a normal rainwater tank.