3P Filter collector

Downpipe filter

Operating principle

  1. Rainwater is channelled from the filter entrance to the sieve cartridge.
  2. Dirt is rinsed to the sides, and to waste.
  3. Cleaned water is led through the cartridge outlet channel to storage.
  4. Settings for winter and summer conditions. Twist 180° to remove the cartridge filter, no need to dismount filter body. The filter cartridge can be cleaned easily with detergent and a brush.

The 3P Filter Collector filters and collects rainwater for water butts and rain tanks. It is made of high quality durable plastic.

The Filter Collector leads clean water to the storage tank with high efficiency under normal rainfall (85 to 95%). The filter can act as the overflow outlet for the tank once filled.

With 2 positions open or closed.

Integrated filter sieve. The mesh is made of stainless steel (mesh size 0,7 x 1,7 mm).

For roof areas up to 70 m².

For installation in downpipes at 68 mm and 110 mm, adapters included.

Easy installation and maintenance.

Complete with adapter and reduction sets.

Technical Data

Assembly in standpipes or downpipes at Ø68 - 110 mm.

Housing material: Polyethylen

Material filter sieve: stainless steel 1.403

Mesh size 0,7 x 1,7 mm

Weight: 0,86 kg

  1. Reduction at Ø 68 - 100 mm.
  2. Connector for downpipes Ø 110 mm.
  3. Outlet connection at Ø 75 mm.
  4. Adapter for connection Ø 50 mm/32 mm.
  5. Guiding plates.
  6. Stainless Steel filter mesh.
  7. Settings for open/closed conditions.

Application

3P Filter Collector brown with adapter, here connected directly with the 3P Rainwater Tank with a capacity of 300 l.

3P Filter Collector grey without adapter, here connected directly with the 3P Rainwater Tank with a capacity of 500 l.

3P Filter Collector grey connected with a Feature Water Tank.

We make planning
as easy as possible for you.

Contact
Planning tool
Showroom